Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 20-45 minutes

Alarm 61338

Siemens 61338 - Block : Positioning speed equal to zero

Block: Positioning speed equal to zero

Siemens SINUMERIKProgram/G-codeIntermediate20-45 minutes

61338

Siemens 61338 - Block : Positioning speed equal to zero

Block: Positioning speed equal to zero

Block: Positioning speed equal to zero

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Troubleshooting Steps

  1. 1For some measuring versions, for example measuring spigots, in addition to the actual measuring paths, intermediate paths are generated that are traversed with a specified feed.
  2. 2The values for the feed are specified: - For 840D sl - up to SW 1.x: in parameters _SPEED[1] and _SPEED[2] in GUD6.
  3. 3For 840D sl/828D - as from SW 2.5: in setting data 55631 $SCS_MEA_FEED_PLANE_VALUE and 55632 $SCS_MEA_FEED_FEEDAX_VALUE Alarms

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.