axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 300413 - Error when reading a file ( , )
An attempt to read a data block, e.g. a drive boot file, from the file system has failed. The data block or the file system is damaged Control reaction: Interface signals are set. Alarm display.
300413
Siemens 300413 - Error when reading a file ( , )
Error when reading a file (,)
An attempt to read a data block, e.g. a drive boot file, from the file system has failed. The data block or the file system is damaged Control reaction: Interface signals are set. Alarm display.
Safety
- Drive/power/encoder circuit: hazardous voltages may remain in the DC link after power-off. Lock out / tag out, wait for discharge per the drive documentation, and use qualified personnel only.
Common Causes
- An attempt to read a data block, e.g. a drive boot file, from the file system has failed.
- The data block or the file system is damaged
Troubleshooting Steps
- 1If the error occurred during power-up, i.e. it is probably connected to a drive boot file, delete all boot files and load them back into the control from the back-up copy.
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.