axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 300412 - Error when storing a file ( , )
An attempt to save a data block, e.g. the result of a measuring function, in the file system has failed Control reaction: Interface signals are set. Alarm display.
300412
Siemens 300412 - Error when storing a file ( , )
Error when storing a file (,)
An attempt to save a data block, e.g. the result of a measuring function, in the file system has failed Control reaction: Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- An attempt to save a data block, e.g. the result of a measuring function, in the file system has failed
Troubleshooting Steps
- 1Please inform the authorized personnel/service department.
- 2Create more space in the file system.
- 3It is normally sufficient to delete 2 NC programs or to free 4 - 8 Kbytes of memory.
- 4If these remedies do not work, it will be necessary to increase the number of files per directory or the size of the file system itself.
- 5To do so, proceed as follows: - Save all data - Change settings of machine data - 18280 $MM_NUM_FILES_PER_DIR - 18320 $MM_NUM_FILES_IN_FILESYSTEM - 18350 $MM_USER_FILE_MEM_MINIMUM - and, if necessary, of - 18270 $MM_NUM_SUBDIR_PER_DIR - 18310 $MM_NUM_DIR_IN_FILESYSTEM - Power On - Reload saved data
- 6Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.