Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Spindle · Intermediate · 20-45 minutes

Alarm 20056

Siemens 20056 - Axis no revolutional feedrate possible. Axis/spindle stationary

An axis is to travel in JOG with revolutional feed, but the spindle/axis the feed is to be derived from is 0 Control reaction: Alarm display.

Siemens SINUMERIKSpindleIntermediate20-45 minutes

20056

Siemens 20056 - Axis no revolutional feedrate possible. Axis/spindle stationary

Axis no revolutional feedrate possible. Axis/spindle stationary

An axis is to travel in JOG with revolutional feed, but the spindle/axis the feed is to be derived from is 0 Control reaction: Alarm display.

Safety

  • Spindle hazard: ensure the spindle is at standstill before working near it; follow lockout/tagout procedures.

Common Causes

  • An axis is to travel in JOG with revolutional feed, but the spindle/axis the feed is to be derived from is 0

Troubleshooting Steps

  1. 1Traverse the spindle/axis from which the feed is to be derived.
  2. 2Alarm display showing cause of alarm disappears. No further operator action necessary. Continuation: Alarms

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.