Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 20063

Siemens 20063 - Axis orientation axes cannot be traversed without transformation

An attempt was made to move an orientation axis in JOG mode without an active orientation transformation Control reaction: Alarm display.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

20063

Siemens 20063 - Axis orientation axes cannot be traversed without transformation

Axis orientation axes cannot be traversed without transformation

An attempt was made to move an orientation axis in JOG mode without an active orientation transformation Control reaction: Alarm display.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • An attempt was made to move an orientation axis in JOG mode without an active orientation transformation

Troubleshooting Steps

  1. 1Activate an orientation transformation.
  2. 2Clear alarm with the Delete key or NC START. Continuation: Alarms

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.