axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 18313 - Block frame: illegal switchover of geometry axes
It is not allowed to change the geometry axis assignment because the current frame contains rotations Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm.
18313
Siemens 18313 - Block frame: illegal switchover of geometry axes
Block frame: illegal switchover of geometry axes
It is not allowed to change the geometry axis assignment because the current frame contains rotations Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- It is not allowed to change the geometry axis assignment because the current frame contains rotations
Troubleshooting Steps
- 1Change NC program or set other mode with MD10602 $MN_FRAME_GEOAX_CHANGE_MODE.
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.