Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 17224

Siemens 17224 - Block tool T/D= - tool type is not permitted

On this system, it is not possible to select tool offsets of the indicated tool types. The variety of tool types can both be limited by the machine OEM and be reduced on individual control models. Only use tools of the tool types permitted for this system. Check whether an error has occurred on defining the tool Control reaction: Correction block is reorganized. Interpreter stop Interface signals are set. Alarm display.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

17224

Siemens 17224 - Block tool T/D= - tool type is not permitted

Block tool T/D= - tool type is not permitted

On this system, it is not possible to select tool offsets of the indicated tool types. The variety of tool types can both be limited by the machine OEM and be reduced on individual control models. Only use tools of the tool types permitted for this system. Check whether an error has occurred on defining the tool Control reaction: Correction block is reorganized. Interpreter stop Interface signals are set. Alarm display.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • On this system, it is not possible to select tool offsets of the indicated tool types.
  • The variety of tool types can both be limited by the machine OEM and be reduced on individual control models.
  • Only use tools of the tool types permitted for this system.

Troubleshooting Steps

  1. 1Correct the NC program or correct the tool data
  2. 2Clear alarm with NC START or RESET key and continue the program

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.