axismd.ai
Siemens SINUMERIK Controller
Servo/Axis · Intermediate · 20-45 minutes
Siemens 17220 - Block tool not existing
- The tool which does not exist can also be a multitool (the multitool is treated like a tool) Control reaction: Correction block is reorganized. Interface signals are set. Alarm display.
17220
Siemens 17220 - Block tool not existing
Block tool not existing
- The tool which does not exist can also be a multitool (the multitool is treated like a tool) Control reaction: Correction block is reorganized. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- - The tool which does not exist can also be a multitool (the multitool is treated like a tool)
Troubleshooting Steps
- 1Correct the NC program.
- 2Clear alarm with NC START or RESET key and continue the program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.