axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 17060 - Block requested data area too large
The maximum memory space of 8 KB available for a symbol has been exceeded Control reaction: Correction block is reorganized. Interface signals are set. Alarm display.
17060
Siemens 17060 - Block requested data area too large
Block requested data area too large
The maximum memory space of 8 KB available for a symbol has been exceeded Control reaction: Correction block is reorganized. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- The maximum memory space of 8 KB available for a symbol has been exceeded
Troubleshooting Steps
- 1Reduce array dimensions.
- 2Clear alarm with NC START or RESET key and continue the program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.