Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Servo/Axis · Intermediate · 30-60 minutes

Alarm 16932

Siemens 16932 - Conflict when activating user data type

The "activate user data" function (PI service _N_SETUDT) modifies a data block (tool offset, settable zero offset or base frame) which is also written by the NC blocks in preparation. In the event of a conflict, the value entered by the HMI is reset. Parameter specifies which data block is affected: 1: Active tool offset 2: Base frame 3: Active zero offset Control reaction: Alarm display.

Siemens SINUMERIKServo/AxisIntermediate30-60 minutes

16932

Siemens 16932 - Conflict when activating user data type

Conflict when activating user data type

The "activate user data" function (PI service _N_SETUDT) modifies a data block (tool offset, settable zero offset or base frame) which is also written by the NC blocks in preparation. In the event of a conflict, the value entered by the HMI is reset. Parameter specifies which data block is affected: 1: Active tool offset 2: Base frame 3: Active zero offset Control reaction: Alarm display.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • The "activate user data" function (PI service _N_SETUDT) modifies a data block (tool offset, settable zero offset or base frame) which is also written by the NC blocks in preparation.
  • In the event of a conflict, the value entered by the HMI is reset.
  • Parameter %2 specifies which data block is affected: 1: Active tool offset 2: Base frame 3: Active zero offset

Troubleshooting Steps

  1. 1Check the inputs on the HMI and repeat if necessary.
  2. 2Clear alarm with the Delete key or NC START

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.