axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Basic · 10-20 minutes
Siemens 15310 - Block file requested during block search is not available
During block search, a target has been specified with a program that has not been loaded Control reaction: Alarm display.
15310
Siemens 15310 - Block file requested during block search is not available
Block file requested during block search is not available
During block search, a target has been specified with a program that has not been loaded Control reaction: Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- During block search, a target has been specified with a program that has not been loaded
Troubleshooting Steps
- 1Correct the specified search target accordingly or reload the file.
- 2Clear alarm with the Delete key or NC START
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.