axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 20-45 minutes
Siemens 15010 - Block program coordination instruction with invalid channel
A WAITM, WAITMC,INIT or START instruction was programmed with an invalid channel number Control reaction: Correction block is reorganized. Interface signals are set. Alarm display.
15010
Siemens 15010 - Block program coordination instruction with invalid channel
Block program coordination instruction with invalid channel
A WAITM, WAITMC,INIT or START instruction was programmed with an invalid channel number Control reaction: Correction block is reorganized. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- A WAITM, WAITMC,INIT or START instruction was programmed with an invalid channel number
Troubleshooting Steps
- 1Correct the instruction accordingly.
- 2Clear alarm with NC START or RESET key and continue the program. Continuation: Alarms
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.