axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 14745 - Block centerless grinding not active
An attempt has been made to switch off the centerless grinding function even though it was not active Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
14745
Siemens 14745 - Block centerless grinding not active
Block centerless grinding not active
An attempt has been made to switch off the centerless grinding function even though it was not active Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- An attempt has been made to switch off the centerless grinding function even though it was not active
Troubleshooting Steps
- 1Modify part program.
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.