axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 14310 - Handwheel configuration incorrect or inactive
- The inputs are using a drive with a drive number that does not exist or - an inactive drive for assignment of the handwheel (ENC_HANDWHEEL_MODULE_NR) or - an axis is using a measuring circuit which does not exist for the drive hardware Control reaction: NC Start disable in this channel. Interface signals are set. Alarm display.
14310
Siemens 14310 - Handwheel configuration incorrect or inactive
Handwheel configuration incorrect or inactive
- The inputs are using a drive with a drive number that does not exist or - an inactive drive for assignment of the handwheel (ENC_HANDWHEEL_MODULE_NR) or - an axis is using a measuring circuit which does not exist for the drive hardware Control reaction: NC Start disable in this channel. Interface signals are set. Alarm display.
Safety
- Drive/power/encoder circuit: hazardous voltages may remain in the DC link after power-off. Lock out / tag out, wait for discharge per the drive documentation, and use qualified personnel only.
Common Causes
- - The inputs are using a drive with a drive number that does not exist or - an inactive drive for assignment of the handwheel (ENC_HANDWHEEL_MODULE_NR) or - an axis is using a measuring circuit which does not exist for the drive hardware
Troubleshooting Steps
- 1Please inform the authorized personnel/service department.
- 2Check input configuration (machine data) and/or drive hardware.
- 3Power-up is interrupted.
- 4Switch control OFF - ON. 2-229
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.