axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 20-40 minutes
Siemens 14134 - Block G code for orientation interpolation not allowed
It will only be possible to program a G code of the 51st G code group, if MD21104 $MC_ORI_IPO_WITH_G_CODE has been set to TRUE Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
14134
Siemens 14134 - Block G code for orientation interpolation not allowed
Block G code for orientation interpolation not allowed
It will only be possible to program a G code of the 51st G code group, if MD21104 $MC_ORI_IPO_WITH_G_CODE has been set to TRUE Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- It will only be possible to program a G code of the 51st G code group, if MD21104 $MC_ORI_IPO_WITH_G_CODE has been set to TRUE
Troubleshooting Steps
- 1Adapt machine data.
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.