What causes Siemens SINUMERIK alarm 14096?

Variable assignment attempting to convert a value outside the target data type's range. Arithmetic operation result exceeds the maximum or minimum value for the target variable type. Implicit type conversion from REAL to INT with loss of precision or overflow. Array index or loop counter calculation producing out-of-range values. Comparison or mathematical operation between incompatible variable types without proper casting.

How do I fix Siemens SINUMERIK alarm 14096?

1. Review the G-code at the specified block number in the program listing and identify the variable assignment or arithmetic operation causing the alarm 2. Check the data types of all variables involved in the operation and verify they are appropriate for the values being assigned or calculated 3. Verify that REAL to INT conversions are explicitly handled using type casting functions and that values remain within the INT range (-2147483648 to 2147483647) 4. Examine loop counters, array indices, and arithmetic results to ensure they do not exceed the valid range for their declared data types 5. Modify the program to use appropriate data types or add explicit type conversion with value range validation before execution

Siemens SINUMERIK codes

axismd.ai

Siemens SINUMERIK Controller

Servo/Axis · Intermediate · 20-45 minutes

Alarm 14096

Siemens 840D 14096 - Channel block illegal type conversion

During the program run, a variable value assignment or an arithmetic operation has caused data to be processed in such a way that they have to be converted to another type. This would lead to the value range being exceeded. Value ranges of the various variable types: - REAL: Property: Fractional num

Siemens SINUMERIKServo/AxisIntermediate20-45 minutes

14096

Siemens 840D 14096 - Channel block illegal type conversion

Channel block illegal type conversion

Safety

Refer to Siemens documentation
Ensure qualified technician performs repairs

Common Causes

Variable assignment attempting to convert a value outside the target data type's range
Arithmetic operation result exceeds the maximum or minimum value for the target variable type
Implicit type conversion from REAL to INT with loss of precision or overflow
Array index or loop counter calculation producing out-of-range values
Comparison or mathematical operation between incompatible variable types without proper casting

Troubleshooting Steps

1Review the G-code at the specified block number in the program listing and identify the variable assignment or arithmetic operation causing the alarm
2Check the data types of all variables involved in the operation and verify they are appropriate for the values being assigned or calculated
3Verify that REAL to INT conversions are explicitly handled using type casting functions and that values remain within the INT range (-2147483648 to 2147483647)
4Examine loop counters, array indices, and arithmetic results to ensure they do not exceed the valid range for their declared data types
5Modify the program to use appropriate data types or add explicit type conversion with value range validation before execution

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.