axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 14088 - Block axis doubtful position
An axis position larger than 3.40e+38 increments has been programmed. This alarm can be suppressed with bit11 in MD11410 $MN_SUPPRESS_ALARM_MASK Control reaction: Correction block is reorganized. Interface signals are set. Alarm display.
14088
Siemens 14088 - Block axis doubtful position
Block axis doubtful position
An axis position larger than 3.40e+38 increments has been programmed. This alarm can be suppressed with bit11 in MD11410 $MN_SUPPRESS_ALARM_MASK Control reaction: Correction block is reorganized. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- An axis position larger than 3.40e+38 increments has been programmed.
- This alarm can be suppressed with bit11 in MD11410 $MN_SUPPRESS_ALARM_MASK
Troubleshooting Steps
- 1Modify part program.
- 2Clear alarm with NC START or RESET key and continue the program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.