axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 10771 - Block overflow of local block buffer due to orientation smoothing
This error occurs when more blocks must be buffered than memory space is available. This error can only occur when the software has been incorrectly configured Control reaction: Correction block is reorganized. Local alarm reaction. Interface signals are set. Alarm display.
10771
Siemens 10771 - Block overflow of local block buffer due to orientation smoothing
Block overflow of local block buffer due to orientation smoothing
This error occurs when more blocks must be buffered than memory space is available. This error can only occur when the software has been incorrectly configured Control reaction: Correction block is reorganized. Local alarm reaction. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- This error occurs when more blocks must be buffered than memory space is available.
- This error can only occur when the software has been incorrectly configured
Troubleshooting Steps
- 1Increase size of local buffer area.
- 2Clear alarm with NC START or RESET key and continue the program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.