axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 10656 - Axis gantry slave axis dynamically overloaded
The indicated gantry slave axis is dynamically overloaded, i.e. the slave axis cannot follow the master axis dynamically Control reaction: Mode group not ready. Local alarm reaction. Channel not ready. Interface signals are set. Alarm display.
10656
Siemens 10656 - Axis gantry slave axis dynamically overloaded
Axis gantry slave axis dynamically overloaded
The indicated gantry slave axis is dynamically overloaded, i.e. the slave axis cannot follow the master axis dynamically Control reaction: Mode group not ready. Local alarm reaction. Channel not ready. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- The indicated gantry slave axis is dynamically overloaded, i.e. the slave axis cannot follow the master axis dynamically
Troubleshooting Steps
- 1Please inform the authorized personnel/service department.
- 2Compare the axial machine data of the gantry slave axis with the data of the gantry master axis
- 3Clear alarm with the RESET key in all channels of this mode group. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.