Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 20-40 minutes

Alarm 10600

Siemens 10600 - Block auxiliary function during thread cutting active

An auxiliary function output is programmed in a thread cutting block Control reaction: Alarm display.

Siemens SINUMERIKProgram/G-codeIntermediate20-40 minutes

10600

Siemens 10600 - Block auxiliary function during thread cutting active

Block auxiliary function during thread cutting active

An auxiliary function output is programmed in a thread cutting block Control reaction: Alarm display.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • An auxiliary function output is programmed in a thread cutting block

Troubleshooting Steps

  1. 1Consequential errors can occur if the machining path of the thread block is too short and further blocks (thread blocks) follow in which no machining stop may occur.
  2. 2Possible remedial measures: -
  3. 3Clear alarm with the Delete key or NC START

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.