axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 840D 100118 - 'Skip blocks' ignored for this file!
SIEMENS alarm 100118 occurs when skip block functionality (/) is disabled or restricted for the currently executing NC program file. This typically happens when the file type, execution mode, or system configuration prevents skip block processing from being applied to the program.
100118
Siemens 840D 100118 - 'Skip blocks' ignored for this file!
'Skip blocks' ignored for this file!
Siemens SINUMERIK operator message 100118: 'Skip blocks' ignored for this file!. This is an informational message from the SINUMERIK control indicating a system status or operation result that may require operator action.
Root Cause Summary
SIEMENS alarm 100118 occurs when skip block functionality (/) is disabled or restricted for the currently executing NC program file. This typically happens when the file type, execution mode, or system configuration prevents skip block processing from being applied to the program.
Safety
- Refer to Siemens documentation
- Ensure qualified technician performs repairs
Causes and Fixes
- 1
Check file type and protection status
Navigate to HMI > Program Manager and verify if the file has system protection attributes or is located in protected directories like /siemens/sinumerik/
System cycles and manufacturer programs typically have this protection enabled by default
- 2
Verify program execution mode
Check if program is running in a restricted execution mode via HMI > Machine > Operating Area > Program Control
Do not attempt to modify system-protected files without proper authorization
- 3
Review file permissions
Access HMI > Commissioning > System Data > File System and check read/write permissions for the current program file
Call a technician if:
- ·Safety system modifications required
- ·Machine data changes beyond operator access level
- ·System file protection needs modification
Prevention
- Verify skip block requirements before program execution
- Use appropriate file locations for user programs
- Maintain proper access levels for skip block functionality
Common Mistakes
- Attempting to use skip blocks in system cycles
- Not checking machine data skip block enable settings
- Ignoring safety system restrictions on program modification
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.