What causes Siemens SINUMERIK alarm 100117?

Normal control operation generated this status message. User action or program command triggered this notification. System configuration or commissioning activity produced this message. Machine data or parameter change created this notification.

How do I fix Siemens SINUMERIK alarm 100117?

1. Read the complete message text on the SINUMERIK screen — note any parameter values shown. 2. If action is required, follow the instructions in the message. 3. Acknowledge the message on the operator panel to continue operation. 4. Consult the Siemens SINUMERIK alarm documentation for message 100117 if clarification is needed. 5. If this message appears unexpectedly, review recent parameter or configuration changes.

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 100117

Siemens 840D 100117 - Please wait, selected group is being deleted!

SIEMENS alarm 100117 occurs when the system is actively deleting a selected axis group or spindle group configuration. This is typically a status message during group reconfiguration operations in the machine data or axis configuration menus.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

100117

Siemens 840D 100117 - Please wait, selected group is being deleted!

Please wait, selected group is being deleted!

Root Cause Summary

SIEMENS alarm 100117 occurs when the system is actively deleting a selected axis group or spindle group configuration. This is typically a status message during group reconfiguration operations in the machine data or axis configuration menus.

Safety

Refer to Siemens documentation
Ensure qualified technician performs repairs

Causes and Fixes

1
Wait for Process Completion
Allow the group deletion process to complete naturally. Monitor HMI display for completion confirmation or error messages.
Group deletion typically takes 10-30 seconds depending on system complexity
2
Verify Group Status
Navigate to Commissioning > Machine > Axis/Spindle to verify the selected group has been successfully removed from configuration.
Do not power cycle during active deletion process
3
Check System Messages
Review alarm buffer and system messages for any related errors or confirmation of successful group deletion completion.

DIY Feasiblehigh confidence

Call a technician if:

·Alarm persists after NCK restart
·Group deletion fails repeatedly
·Machine data corruption suspected

Prevention

Always complete group configuration changes before powering down
Avoid simultaneous multiple group modifications
Regularly backup machine data before configuration changes

Common Mistakes

Powering off during active deletion
Attempting multiple group operations simultaneously
Not waiting for process completion before next operation

Related Alarms

100116 100118 10914 10915

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.