axismd.ai
Siemens SINUMERIK Controller
Servo/Axis · Intermediate · 45-90 minutes
Siemens 61733 - block: ]cutting edge not compatible with machining direction
Siemens SINUMERIK alarm 61733: block: ]cutting edge not compatible with machining direction. Detailed remedy is being verified against the current Siemens diagnostics manual.
61733
Siemens 61733 - block: ]cutting edge not compatible with machining direction
block: ]cutting edge not compatible with machining direction
Siemens SINUMERIK alarm 61733: block: ]cutting edge not compatible with machining direction. Detailed remedy is being verified against the current Siemens diagnostics manual.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Troubleshooting Steps
- 1Note the full alarm text and any values shown with it (channel, block, axis).
- 2Check the SINUMERIK diagnostics manual for your control version, or contact the machine builder.
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.