Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Servo/Axis · Advanced · 45-90 minutes

Alarm 61732

Siemens 61732 - No material available for machining

Siemens SINUMERIK alarm 61732: No material available for machining. Detailed remedy is being verified against the current Siemens diagnostics manual.

Siemens SINUMERIKServo/AxisAdvanced45-90 minutes

61732

Siemens 61732 - No material available for machining

No material available for machining

Siemens SINUMERIK alarm 61732: No material available for machining. Detailed remedy is being verified against the current Siemens diagnostics manual.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Troubleshooting Steps

  1. 1Note the full alarm text and any values shown with it (channel, block, axis).
  2. 2Check the SINUMERIK diagnostics manual for your control version, or contact the machine builder.

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.