Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Servo/Axis · Intermediate · 20-40 minutes

Alarm 61519

Siemens 840D 61519 - Channel block: Incorrect type of machining

The alarm can be triggered by the following grinding cycles: CYCLE410, CYCLE411, CYCLE412, CYCLE413, CYCLE415 Remedy: Assign a value between 1 and 3 to parameter B_ART

Siemens SINUMERIKServo/AxisIntermediate20-40 minutes

61519

Siemens 840D 61519 - Channel block: Incorrect type of machining

Channel block: Incorrect type of machining

The alarm can be triggered by the following grinding cycles: CYCLE410, CYCLE411, CYCLE412, CYCLE413, CYCLE415 Remedy: Assign a value between 1 and 3 to parameter B_ART

Safety

  • Refer to Siemens documentation
  • Ensure qualified technician performs repairs

Common Causes

  • Parameter B_ART not assigned or set to an invalid value outside the range 1-3
  • Grinding cycle (CYCLE410, CYCLE411, CYCLE412, CYCLE413, or CYCLE415) called with incorrect machining type specification
  • Part program syntax error in cycle call with missing or malformed B_ART argument
  • Incorrect machine configuration or grinding cycle setup not compatible with selected B_ART value

Troubleshooting Steps

  1. 1Review the part program block at the specified location and verify the grinding cycle call (CYCLE410-415) includes parameter B_ART with a value of 1, 2, or 3
  2. 2Check machine documentation to confirm which B_ART values (1, 2, or 3) correspond to the required grinding operation type
  3. 3Edit the part program to assign the correct B_ART value explicitly in the cycle call; example: CYCLE410(...B_ART=2...)
  4. 4Verify machine grinding cycle parameters and configuration match the part program requirements; contact Siemens support if cycle definitions are non-standard
  5. 5Reload and re-execute the corrected part program block to confirm the alarm clears

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.