axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-60 minutes
Siemens 61261 - Block : center offset too large
The center offset on center drilling is larger than permissible Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
61261
Siemens 61261 - Block : center offset too large
Block: center offset too large
The center offset on center drilling is larger than permissible Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- The center offset on center drilling is larger than permissible
Troubleshooting Steps
- 1Enter lower eccentricity ($SCS_DRILL_MID_MAX_ECCENT).
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.