axismd.ai

Siemens SINUMERIK Controller

Servo/Axis · Intermediate · 30-45 minutes

Alarm 61150

Siemens 61150 - Block : Tool cannot be aligned --> error code:

Block: Tool cannot be aligned --> error code

Siemens SINUMERIKServo/AxisIntermediate30-45 minutes

61150

Siemens 61150 - Block : Tool cannot be aligned --> error code:

Block: Tool cannot be aligned --> error code

Safety

Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Troubleshooting Steps

1Causes of error: 1st error code = A -> only new swivel plane permitted, see parameter _ST

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.