Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Servo/Axis · Intermediate · 15-30 minutes

Alarm 61016

Siemens 61016 - Block : System frame for cycles missing

Block: System frame for cycles missing

Siemens SINUMERIKServo/AxisIntermediate15-30 minutes

61016

Siemens 61016 - Block : System frame for cycles missing

Block: System frame for cycles missing

Block: System frame for cycles missing

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Troubleshooting Steps

  1. 1Set MD 28082: MM_SYSTEM_FRAME_MASK, Bit 5=1.
  2. 2Alarms

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.