axismd.ai
Siemens SINUMERIK Controller
Servo/Axis · Intermediate · 30-120 minutes
Siemens 311716 - Axis drive SSI measuring system without incremental signals not
With the present module, it is not possible to use SSI encoders without incremental signals Control reaction: Mode group not ready. Channel not ready. NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm.
311716
Siemens 311716 - Axis drive SSI measuring system without incremental signals not
Axis drive SSI measuring system without incremental signals not
With the present module, it is not possible to use SSI encoders without incremental signals Control reaction: Mode group not ready. Channel not ready. NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm.
Safety
- Drive/power/encoder circuit: hazardous voltages may remain in the DC link after power-off. Lock out / tag out, wait for discharge per the drive documentation, and use qualified personnel only.
Common Causes
- With the present module, it is not possible to use SSI encoders without incremental signals
Troubleshooting Steps
- 1Use newer module.
- 2Switch control OFF - ON
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.