axismd.ai
Siemens SINUMERIK Controller
PLC · Intermediate · 30-120 minutes
Siemens 20150 - Tool management: PLC terminates interrupted command
Indication that the PLC has terminated an interrupted command (with alarm output) from the tool management - tool change Control reaction: Interface signals are set. Alarm display.
20150
Siemens 20150 - Tool management: PLC terminates interrupted command
Tool management: PLC terminates interrupted command
Indication that the PLC has terminated an interrupted command (with alarm output) from the tool management - tool change Control reaction: Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- Indication that the PLC has terminated an interrupted command (with alarm output) from the tool management - tool change
Troubleshooting Steps
- 1For information only.
- 2Clear alarm with the Delete key or NC START
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.