Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Basic · 10-20 minutes

Alarm 15330

Siemens 15330 - Block invalid block number as search target

Syntax error! Positive integers are allowed as block numbers. Block numbers must be preceded by ":" and subblocks by an "N" Control reaction: Alarm display. Alarms.

Siemens SINUMERIKProgram/G-codeBasic10-20 minutes

15330

Siemens 15330 - Block invalid block number as search target

Block invalid block number as search target

Syntax error! Positive integers are allowed as block numbers. Block numbers must be preceded by ":" and subblocks by an "N" Control reaction: Alarm display. Alarms.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • Syntax error!
  • Positive integers are allowed as block numbers.
  • Block numbers must be preceded by ":" and subblocks by an "N"

Troubleshooting Steps

  1. 1Repeat the input with corrected block number.
  2. 2Clear alarm with the Delete key or NC START

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.