axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 14850 - Block changing the reference axis for a constant cutting speed not
The attempt was made via the SCC[AX] instruction to change the reference axis for a constant cutting speed. This is not allowed if the indicated axis is no geometry axis Control reaction: Correction block is reorganized. Local alarm reaction. Interface signals are set. Alarm display.
14850
Siemens 14850 - Block changing the reference axis for a constant cutting speed not
Block changing the reference axis for a constant cutting speed not
The attempt was made via the SCC[AX] instruction to change the reference axis for a constant cutting speed. This is not allowed if the indicated axis is no geometry axis Control reaction: Correction block is reorganized. Local alarm reaction. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- The attempt was made via the SCC[AX] instruction to change the reference axis for a constant cutting speed.
- This is not allowed if the indicated axis is no geometry axis
Troubleshooting Steps
- 1Please inform authorized personnel/service.
- 2When programming SCC[AX] indicate a geometry axis known in the channel.
- 3Clear alarm with NC START or RESET key and continue the program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.