Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Communication · Intermediate · 30-120 minutes

Alarm 142009

Siemens 142009 - Machine ready for remote diagnostics!

Are triggered in "PLC Controlled" mode Control reaction: Alarm display.

Siemens SINUMERIKCommunicationIntermediate30-120 minutes

142009

Siemens 142009 - Machine ready for remote diagnostics!

Machine ready for remote diagnostics!

Are triggered in "PLC Controlled" mode Control reaction: Alarm display.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • Are triggered in "PLC Controlled" mode

Troubleshooting Steps

  1. 1Acknowledge alarm
  2. 2Internal

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.