axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 14148 - Illegal reference system for Cartesian manual traverse
In the SD42650 $SC_CART_JOG_MODE, an illegal value has been entered for the reference system with Cartesian manual travel Control reaction: Alarm display.
14148
Siemens 14148 - Illegal reference system for Cartesian manual traverse
Illegal reference system for Cartesian manual traverse
In the SD42650 $SC_CART_JOG_MODE, an illegal value has been entered for the reference system with Cartesian manual travel Control reaction: Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- In the SD42650 $SC_CART_JOG_MODE, an illegal value has been entered for the reference system with Cartesian manual travel
Troubleshooting Steps
- 1Enter a permitted value in the SD42650 $SC_CART_JOG_MODE.
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.