axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 129938 - Status of workpiece ( ) could not be determined.
The state?editable? of the DAT file or the workpiece could not be determined
129938
Siemens 129938 - Status of workpiece ( ) could not be determined.
Status of workpiece could not be determined.
The state?editable? of the DAT file or the workpiece could not be determined
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- The state ?editable? of the DAT file or the workpiece could not be determined
Troubleshooting Steps
- 1Restart communication to the NC, if required
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.