Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 129910

Siemens 129910 - : Unable to determine general machine data.

The general machine data of the specified NCU could not be determined

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

129910

Siemens 129910 - : Unable to determine general machine data.

: Unable to determine general machine data.

The general machine data of the specified NCU could not be determined

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • The general machine data of the specified NCU could not be determined

Troubleshooting Steps

  1. 1Connect to the NCU and restart the PCU if required.
  2. 2Alarms

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.