Siemens SINUMERIK codes
axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Alarm 129909
Siemens 129909 - : Unable to determine the name of channel .
The channel name of the specified NCU could not be determined
Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes
129909
Siemens 129909 - : Unable to determine the name of channel .
: Unable to determine the name of channel.
The channel name of the specified NCU could not be determined
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- The channel name of the specified NCU could not be determined
Troubleshooting Steps
- 1Connect to the NCU and restart the PCU if required
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.