axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 20-45 minutes
Siemens 10882 - Block activation of chamfers or radii (non-modal) without traversing
No chamfer or radius has been inserted between 2 linear or circle contours (edge breaking) because: There is no straight line or circle contour in the plane There is a movement outside the plane A plane change has taken place The permissible number of empty blocks without traversing information (dummy blocks) has been exceeded Control reaction: Correction block is reorganized. Local alarm reaction. Interface signals are set. Alarm display.
10882
Siemens 10882 - Block activation of chamfers or radii (non-modal) without traversing
Block activation of chamfers or radii (non-modal) without traversing
No chamfer or radius has been inserted between 2 linear or circle contours (edge breaking) because: There is no straight line or circle contour in the plane There is a movement outside the plane A plane change has taken place The permissible number of empty blocks without traversing information (dummy blocks) has been exceeded Control reaction: Correction block is reorganized. Local alarm reaction. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- No chamfer or radius has been inserted between 2 linear or circle contours (edge breaking) because: There is no straight line or circle contour in the plane There is a movement outside the plane A plane change has taken place The permissible number of empty blocks without traversing information (dummy blocks) has been exceeded
Troubleshooting Steps
- 1Please inform the authorized personnel/service department.
- 2Correct the part program according to the above error description or change the number of dummy blocks in the channel-specific MD20200 $MC_CHFRND_MAXNUM_DUMMY_BLOCKS to comply with the maximum number allowed for in the program.
- 3Clear alarm with NC START or RESET key and continue the program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.