101008

Verify the displayed access level matches your expected authorization (Level 0=User, 1=Service, 2=Manufacturer, 3=System).

If the access level is correct for your intended operation, acknowledge the alarm and proceed normally.

Document the access level if performing maintenance or parameter changes for traceability purposes.

No further action required - this is purely informational and does not indicate a fault condition.

Identify the required access level for your intended operation by consulting the machine or parameter documentation.

If using keyswitch: Turn the keyswitch to the appropriate position (3=highest, 0=lowest). Power cycle may be required.

Changing keyswitch position may require machine restart. Ensure machine is in safe state before cycling power.

If using password protection: Navigate to Services > Protection Level, enter the correct password for required access level.

Only authorized personnel should have access to service, manufacturer, or system level passwords.

Verify the new access level is displayed correctly and retry your operation. Return to user level when higher access is no longer needed.

Check if any recent parameter changes or machine data modifications were made that triggered this security verification.

Review the alarm log history (Diagnostics > Alarms > Archive) to identify if parameter changes occurred before this alarm.

If unauthorized changes are suspected, restore parameters from backup and implement proper access control procedures.

Always create backup of machine data before making changes at elevated access levels.

Ensure passwords are changed if security breach is confirmed and document the incident per company procedures.