280-047C

Access machine parameter menu

Press MOD key, select 'Machine parameters' from the TNC menu, navigate to spindle parameters section (MP7300 series).

Always backup current parameters before making changes using the data backup function.

Verify spindle type parameter MP7300

Check MP7300.x value matches actual spindle type: 0=no spindle, 1=servo spindle, 2=frequency converter spindle, 3=positioning spindle.

Incorrect spindle type setting can damage spindle drive components.

Validate related spindle parameters

Check MP7310 (max spindle speed), MP7320 (spindle gear ratios), and MP7330 (spindle acceleration) for consistency with spindle specifications.

Restart control system

Perform controlled shutdown and restart of TNC control to activate new parameter settings.

Ensure all axes are in safe position before restart.

Check spindle encoder parameters

Navigate to MP7340 series and verify encoder type, resolution, and connection parameters match the installed spindle encoder specifications.

Verify encoder wiring and connections

Inspect spindle encoder cable connections at both encoder and TNC control ends, check for loose connections or damaged cables.

Test encoder functionality

Use TNC diagnostic functions to verify encoder signal quality and proper feedback during manual spindle rotation.

Use the encoder test function in the service menu to validate signal integrity.

Reconfigure encoder parameters if needed

Update MP7340.x parameters with correct encoder specifications and perform encoder reference procedure.

Check spindle drive interface parameters

Review MP7350 series parameters for correct drive interface type (analog, digital, fieldbus) and communication settings.

Verify drive communication cables

Inspect communication cables between TNC and spindle drive, ensure proper shielding and connection integrity.

Test drive communication

Use TNC service diagnostics to verify bidirectional communication with spindle drive and check for error messages.

Reconfigure interface parameters

Update communication parameters to match drive specifications and perform communication test sequence.

Check spindle orientation parameters

Verify MP7360 (spindle orientation active), MP7365 (orientation angle), and MP7370 (orientation tolerance) settings.

Test manual spindle orientation

Execute manual spindle orientation command (M19) to verify proper operation and positioning accuracy.

Calibrate spindle orientation

Perform spindle orientation calibration procedure using TNC setup functions to establish correct reference position.

Review spindle safety parameters

Check MP7380 series parameters for spindle monitoring, overspeed protection, and safety interlocks.

Validate parameter ranges

Ensure all safety parameter values are within acceptable ranges and compatible with spindle hardware specifications.

Test safety functions

Verify proper operation of spindle safety monitoring and protection systems using TNC diagnostic tools.