axismd.ai
Heidenhain Controller
Servo/Axis · Intermediate · 30-120 minutes
HEIDENHAIN 230-0479 - TRC: The identification was adapted; axis; file
The TRC compensation file was modified and the updated values have been transferred to the CC controller and activated.
230-0479
HEIDENHAIN 230-0479 - TRC: The identification was adapted; axis; file
TRC: The identification was adapted; axis; file
The TRC compensation file was modified and the updated values have been transferred to the CC controller and activated.
Safety
- DC bus voltage remains hazardous for minutes after power-off — wait for discharge before opening the drive cabinet
Common Causes
- TRC file adapted
- New values activated
Troubleshooting Steps
- 1Note the full error text and the NC software number of the control.
- 2Watch for additional related messages.
- 3No further action required.
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.