Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-60 minutes

Alarm 62308

Siemens 62308 - Block : Variable column width not possible

Unable to generate variable column widths, as no header available. A fixed column width of 12 characters is used Control reaction: Alarm display.

Siemens SINUMERIKProgram/G-codeIntermediate30-60 minutes

62308

Siemens 62308 - Block : Variable column width not possible

Block: Variable column width not possible

Unable to generate variable column widths, as no header available. A fixed column width of 12 characters is used Control reaction: Alarm display.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • Unable to generate variable column widths, as no header available.
  • A fixed column width of 12 characters is used

Troubleshooting Steps

  1. 1Complete the header in _PROTVAL[0].
  2. 2Clear alarm with the Delete key or NC START

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.