Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 20-45 minutes

Alarm 61723

Siemens 61723 - Channel block : Machining not possible

Alarm triggered by following cycle: CYCLE950

Siemens SINUMERIKProgram/G-codeIntermediate20-45 minutes

61723

Siemens 61723 - Channel block : Machining not possible

Channel block: Machining not possible

Alarm triggered by following cycle: CYCLE950

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • Alarm triggered by following cycle: CYCLE950

Troubleshooting Steps

  1. 1Use a tool with a larger clearance angle

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.