Siemens SINUMERIK codes
axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-60 minutes
Alarm 61609
Siemens 61609 - Block : Shape incorrectly defined
Block: Shape incorrectly defined
Siemens SINUMERIKProgram/G-codeIntermediate30-60 minutes
61609
Siemens 61609 - Block : Shape incorrectly defined
Block: Shape incorrectly defined
Block: Shape incorrectly defined
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Troubleshooting Steps
- 1Check parameter for the undercut form or groove form or pocket.
- 2Clear alarm with the RESET key. Restart part program Continuation: Alarms
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.