Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Servo/Axis · Intermediate · 10-20 minutes

Alarm 61443

Siemens 840D 61443 - Channel block: Advance angle _INCA=0 or greater/less than +/90° or +/-120°

The alarm can be triggered by the following measuring cycle: CYCLE979 Remedy: Check the value in the parameter advance angle _INCA. If 3-point measurement is selected, _INCA must not be greater/less than +/-120°, and with 4-point measurement _INCA must not be greater/less than +/-90°. The advance an

Siemens SINUMERIKServo/AxisIntermediate10-20 minutes

61443

Siemens 840D 61443 - Channel block: Advance angle _INCA=0 or greater/less than +/90° or +/-120°

Channel block: Advance angle _INCA=0 or greater/less than +/90° or +/-120°

The alarm can be triggered by the following measuring cycle: CYCLE979 Remedy: Check the value in the parameter advance angle _INCA. If 3-point measurement is selected, _INCA must not be greater/less than +/-120°, and with 4-point measurement _INCA must not be greater/less than +/-90°. The advance an

Safety

  • Refer to Siemens documentation
  • Ensure qualified technician performs repairs

Common Causes

  • CYCLE979 advance angle parameter _INCA set outside valid range for selected measurement type
  • 3-point measurement configured with _INCA exceeding +/-120° limits
  • 4-point measurement configured with _INCA exceeding +/-90° limits
  • _INCA parameter set to exactly 0 when non-zero value required
  • Incorrect measurement cycle type selected with incompatible _INCA value

Troubleshooting Steps

  1. 1Identify measurement type in CYCLE979 call (3-point or 4-point) in the active program block
  2. 2Locate and verify current _INCA parameter value in cycle definition or part program
  3. 3For 3-point measurement: confirm _INCA is within -120° to +120° range (non-zero)
  4. 4For 4-point measurement: confirm _INCA is within -90° to +90° range (non-zero)
  5. 5Correct _INCA value to comply with measurement type limits and re-run program block

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.