axismd.ai
Siemens SINUMERIK Controller
Servo/Axis · Basic · 10-20 minutes
Siemens 61269 - Block : External tool diameter too small
Incorrect tool definition Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
61269
Siemens 61269 - Block : External tool diameter too small
Block: External tool diameter too small
Incorrect tool definition Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- Incorrect tool definition
Troubleshooting Steps
- 1Check angle and diameter of the tool used.
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.