Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 15810

Siemens 15810 - Block wrong array dimension for CONTPRON/CONTDCON

The number of columns for the array created for CONTPRON/CONTDCON does not conform to the current programming guide Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

15810

Siemens 15810 - Block wrong array dimension for CONTPRON/CONTDCON

Block wrong array dimension for CONTPRON/CONTDCON

The number of columns for the array created for CONTPRON/CONTDCON does not conform to the current programming guide Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • The number of columns for the array created for CONTPRON/CONTDCON does not conform to the current programming guide

Troubleshooting Steps

  1. 1Modify part program.
  2. 2Clear alarm with the RESET key. Restart part program Continuation: Alarms

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.