axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 12570 - Block too many motion synchronous actions in
No more than 16 actions are allowed in a block with motion synchronous action Control reaction: Correction block is reorganized. Interface signals are set. Alarm display.
12570
Siemens 12570 - Block too many motion synchronous actions in
Block too many motion synchronous actions in
No more than 16 actions are allowed in a block with motion synchronous action Control reaction: Correction block is reorganized. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- No more than 16 actions are allowed in a block with motion synchronous action
Troubleshooting Steps
- 1Reduce the number of programmed actions.
- 2Clear alarm with NC START or RESET key and continue the program. Continuation: Alarms
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.