What causes Siemens SINUMERIK alarm 113014?

Part program contains an illegal or unsupported command for the current machine configuration. Parameter or machine data setting incompatible with the commanded operation. Required option or function not enabled on this SINUMERIK control. Incorrect axis assignment or configuration for the commanded function. Software version or compile cycle version mismatch.

How do I fix Siemens SINUMERIK alarm 113014?

1. Note the full alarm message including any parameter values shown (e.g., axis number, block number, channel). 2. Identify the program block or operation that triggered the alarm. 3. Review the SINUMERIK alarm manual for alarm 113014 to identify the specific cause and remedy. 4. Check the relevant machine data parameters referenced in the alarm. 5. If the alarm persists after correcting the program, contact Siemens technical support with the full alarm text and machine data backup.

Siemens SINUMERIK codes

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 113014

Siemens 840D 113014 - Invalid NC file name

This alarm occurs when an NC file name is invalid or does not conform to the system's naming rules. Correct the file name to resolve the issue.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

113014

Siemens 840D 113014 - Invalid NC file name

Invalid NC file name

Siemens SINUMERIK alarm 113014: Invalid NC file name. This alarm indicates an error condition in the NC program or control configuration that must be resolved before the operation can continue.

Root Cause Summary

This alarm occurs when an NC file name is invalid or does not conform to the system's naming rules. Correct the file name to resolve the issue.

Safety

Refer to Siemens documentation
Ensure qualified technician performs repairs

Causes and Fixes

1
SAFETY: Stop machine operation
Ensure machine is in STOP mode and all axes are stationary before making any file changes.
2
Check file name
Review the file name displayed in the alarm message for invalid characters or length issues.
3
Rename file
Modify the file name to adhere to Siemens naming rules (e.g., no special characters, within length limits).
4
Reload and test
Reload the renamed file and restart the program to verify the alarm is cleared.

DIY Feasiblehigh confidence

Call a technician if:

·If the alarm persists after renaming and verifying the file path
·If system-specific naming rules are unclear

Prevention

Follow Siemens file naming conventions during program creation
Double-check file paths before execution
Always verify program changes in simulation mode before live operation
Maintain backup copies of working programs before making modifications

Common Mistakes

Using special characters or spaces in file names
Referencing files in incorrect directories

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.