What causes Siemens SINUMERIK alarm 112360?

Operator attempted to modify or transfer a program while CNC is actively executing in automatic mode. Program chain selection changed during active program execution. User tried to load a new program into the chain without stopping current operation. Active cycle is still running when attempting to modify program sequence.

How do I fix Siemens SINUMERIK alarm 112360?

1. Stop the current program execution by pressing the STOP button or selecting HALT mode to exit Machine Auto operation 2. Verify the operating mode is no longer in 'Machine Auto' by checking the mode indicator on the control panel 3. Once program execution has stopped, retry the program transfer or modification to the program chain 4. If the program must be changed mid-cycle, use the program stop function to safely interrupt execution before attempting modifications 5. Clear any pending program commands in the queue by accessing the program chain settings after the machine has fully stopped

Siemens SINUMERIK codes

axismd.ai

Siemens SINUMERIK Controller

Servo/Axis · Basic · 5-10 minutes

Alarm 112360

Siemens 840D 112360 - Step was not transferred into program chain program run active.

The program that you want to change is being executed in the operating mode "Machine auto". You can only change programs that are not being executed in the operating mode "Machine auto".

Siemens SINUMERIKServo/AxisBasic5-10 minutes

112360

Siemens 840D 112360 - Step was not transferred into program chain program run active.

Step was not transferred into program chain program run active.

The program that you want to change is being executed in the operating mode "Machine auto". You can only change programs that are not being executed in the operating mode "Machine auto".

Safety

Refer to Siemens documentation
Ensure qualified technician performs repairs

Common Causes

Operator attempted to modify or transfer a program while CNC is actively executing in automatic mode
Program chain selection changed during active program execution
User tried to load a new program into the chain without stopping current operation
Active cycle is still running when attempting to modify program sequence

Troubleshooting Steps

1Stop the current program execution by pressing the STOP button or selecting HALT mode to exit Machine Auto operation
2Verify the operating mode is no longer in 'Machine Auto' by checking the mode indicator on the control panel
3Once program execution has stopped, retry the program transfer or modification to the program chain
4If the program must be changed mid-cycle, use the program stop function to safely interrupt execution before attempting modifications
5Clear any pending program commands in the queue by accessing the program chain settings after the machine has fully stopped

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.